Moolamattom Underground Power House in Idukki, Kerala, is the generating station of the Idukki Hydroelectric Project. Commissioned in two stages in 1976 and 1986, it has an installed capacity of 780 MW. Saron is currently repairing generator control cards for the power house.
Saron developed and supplied interactive hardware for Arogya Nikethanam Hospital’s educational exhibits. The work includes an RFID-based calorie balance with motorised movement and visual feedback, alongside weight and ultrasonic height-measurement hardware. Project photographs show these systems integrated into exhibit stations, connecting physical interaction with on-screen information.
RFID-based food identification for the interactive calorie balance
Motorised balance movement and RGB visual feedback
Weight and ultrasonic height-measurement hardware
RFID identificationMotorised calorie balanceWeight & height sensing
Custom equipment-monitoring electronics bring electrical readings, location and operating information together. The development combines three-phase voltage and current measurement, GPS processing, generator runtime tracking and MQTT telemetry. Project photographs show assembled monitoring units and a unit fitted inside a generator control panel.
A LoRa-based development connects battery-powered door sensors to a Wi-Fi gateway. Reed-switch inputs detect door state, while the node firmware handles battery measurement, sleep and radio transmission. Project photographs document the sensor circuit boards, batteries and enclosure components prepared for hardware assembly.
Temperature-monitoring electronics for cookstove applications, bringing together sensing, data logging, PCB design and enclosure integration. The development explores Bluetooth and GSM or 4G connectivity options. Project photographs show the cookstove and logger units assembled in their enclosures, with the circuit boards and batteries visible.
Cookstove temperature sensing and data-logging design
Bluetooth and GSM or 4G connectivity variants
PCB and enclosure integration
Temperature sensingLogging electronicsBluetooth / cellular
Swim Tracker explores wireless water-immersion alerts through a wearable sensor unit and a separate alarm receiver. The prototype combines four sensor inputs, threshold and timing logic, LoRa communication and battery monitoring. Custom circuit boards, charging hardware and assembled prototype units show the development from electronics design to a physical kit.
Four-sensor threshold and timing experiments
LoRa communication with audible and visual receiver alerts
Custom PCB, charging and wearable enclosure development
Saron’s monitoring dashboard brings together public-tank levels, pump status and TDS readings for water-supply installations in Tamil Nadu. Operators can review current readings, daily pump runtime and historical records from a phone or computer, with downloadable reports that include estimated energy use and calculated dosing volumes based on operating data.
Tank-level, pump-status and measured TDS readings
Daily runtime history and downloadable PDF reports
Estimated energy use and calculated chlorine-solution volumes
An assistive-technology prototype explores voice commands as another way to operate an electric wheelchair. The early design combines a voice-recognition module with servo-driven joystick movement and ultrasonic sensing. Firmware, mechanical development and a hardware assembly support practical investigation of the interaction between spoken instructions and wheelchair controls.
Saron MOTCON V2 units are installed alongside existing pump-control panels at Jalanidhi water-supply sites in Kerala. The project combines wireless water-level control with local displays and pump controls. Field photographs document the controller installations, reservoir and tank locations, and the surrounding pumping and filtration infrastructure.
Wireless water-level control using Saron MOTCON V2
An early connected-device project exploring how proximity checks and location technology can work together in a compact pet tracker. Embedded experiments combine Bluetooth scanning with SIM868 modem operations, positioning workflows and battery checks, supported by component selection and single-board planning.
Bluetooth proximity-scanning experiments
Cellular modem and positioning integration
Battery checks and embedded power-handling research
A wireless paging concept connects patient-room call buttons with a nursing-station display and audible alert. The proposed LoRa architecture uses uniquely identified, battery-powered room beacons and a powered console. Remote PCB and enclosure designs explore the physical implementation of this room-call system.
Room-call signalling with unique beacon identification
Nursing-station room display and audible-alert concept
Our research and development brings sensing, control and connectivity into purpose-built electronic systems.
Electronic product development
Custom electronics and embedded hardware for sensing, switching, monitoring and control.
Embedded systems & software
Device firmware and application interfaces that connect the electronics to the people who use them.
IoT & connected systems
Connected solutions that bring devices, measurements and controls into a useful monitoring experience.
FROM PALAKKAD, KERALA
Research at our roots.
Saron began in 2016 at the incubation centre of Government Engineering College, Palakkad. Today, we develop electronics, software and IoT solutions from our base at KINFRA Defence Park.
Have an application that needs a specific solution? Share the requirement, operating environment and equipment you want to connect.